Trading – Agriculture / INSIGHTS

Green Pea Specification: Colour, Splits and Damage Controls

Published · 5 min read

A green pea specification should define how colour, bleaching, splits, damage and foreign material are assessed. A supplier’s grade name may refer to a national standard, while a buyer may be expecting a different cleaned-sample basis or visual limit. Without methods and sample definitions, two certificates can report similar figures for materially different lots.

The buying file should connect end use, grade, tolerances, sampling and shipment acceptance.

Build the Green Pea Specification Around End Use

State whether the peas are intended for whole retail packing, canning, splitting, milling, feed or another process. The intended use affects which defects matter commercially, but it does not replace food-safety or destination requirements.

Define:

  • product class and colour;
  • crop year and origin where required;
  • whole or split form;
  • minimum or maximum size fraction if relevant;
  • maximum moisture;
  • foreign material and dockage basis;
  • peas of other colours or classes;
  • bleached peas;
  • splits and cracked seed coats;
  • shrivelled, heated, mouldy or otherwise damaged peas;
  • live insects, odour and visible condition;
  • food-safety tests required for the destination and use;
  • packing, net weight, lot size and marking;
  • inspection point, finality and dispute procedure.

When a grade is required, name the country, grade, standard and current edition. Do not combine a grade name from one system with defect definitions taken from another without stating the deviations.

Define the Green Pea Specification Sample Basis

The Canadian Grain Commission’s peas guide distinguishes the gross sample from the cleaned sample. Percentages for human-consumption peas are generally assessed on the cleaned sample, while feed-pea grading factors may use the gross sample. This is an official Canadian procedure and should not be assumed to apply automatically to other origins.

For every tolerance, state:

  1. gross or cleaned sample basis;
  2. cleaning and dockage-removal method;
  3. representative portion size;
  4. assessment method;
  5. result precision and rounding;
  6. treatment of results at the contractual limit;
  7. retained-sample and reinspection procedure.

A one-percent result on a cleaned sample is not directly comparable with one percent calculated before dockage removal.

Control Colour and Bleaching

Green peas can lose the expected green appearance through bleaching or include peas of other colours or classes. These factors should be defined separately.

The Canadian Grain Commission defines a green pea as bleached when at least one-eighth of the cotyledon surface is bleached to a distinct yellow colour in marked contrast to its natural colour. Its procedure removes the seed coat from suspect peas to assess the cotyledon. Use this definition only when the Canadian method is specified or incorporate it expressly into the contract.

Confirm:

  • whether assessment is visual or instrument-based;
  • lighting and standard reference used;
  • whole sample or representative portion;
  • whether the seed coat is removed for suspect peas;
  • maximum bleached percentage;
  • tolerance for yellow, other-colour or contrasting peas;
  • whether colour is a grade factor, separate buyer limit or both.

Avoid descriptions such as “bright green” without an agreed reference or tolerance.

Separate Splits, Cracked Seed Coats and Damage

These conditions are not interchangeable. A split pea may have separated cotyledons; a cracked seed coat can leave the cotyledon largely intact; damage can include heat, insects, sprouting, mould, marsh spot or other deterioration under the selected standard.

The specification should identify each relevant factor and whether factors are reported separately or within a combined maximum. Ask the laboratory or inspector to avoid double counting when one kernel meets more than one definition.

For a whole-pea retail program, confirm:

  • maximum split and broken pieces;
  • cracked seed-coat tolerance;
  • shrivelled peas;
  • insect-damaged peas;
  • heated or binburnt material;
  • mould and objectionable odour;
  • stained or otherwise damaged peas;
  • peas of other colours or classes.

For a splitting or milling program, the commercial emphasis may change, but the contract should still define soundness and safety requirements.

Specify Moisture, Foreign Material and Condition

Moisture affects storage stability, weight and processing. Name the approved test method, sample condition and reporting basis. A portable meter can support operational control, but final acceptance should follow the agreed method.

Foreign material should be defined with the cleaning procedure. Record whether stones, soil, other grains, weed seeds, pods and inert material are separate factors or included in one total. Prohibited or hazardous material should be handled under the destination’s applicable rules, not absorbed into a commercial tolerance.

Require the lot to be free from live infestation and objectionable odour at the agreed inspection point. Define fumigation documentation where required without assuming that treatment replaces inspection.

Use Representative Sampling and Lot Identity

The Canadian guide specifies representative portions divided from the appropriate sample for each grading factor. Commercial contracts should likewise define how samples are drawn and divided.

The sampling plan should include:

  • lot and sub-lot identification;
  • bags, containers, trucks or stream points sampled;
  • number and distribution of increments;
  • composite-sample formation;
  • sample divider and portion sizes;
  • laboratory, buyer and retained samples;
  • seals, labels and custody record;
  • inspection timing and location;
  • re-sampling and appeal procedure.

Keep container and bag marks linked to the certificate. A good test result cannot be assigned confidently to cargo when the lot identity is lost.

Pre-Shipment Document Checklist

  • Contract and specification use the same grade and definitions.
  • Certificate identifies lot, sample date and method.
  • Gross and cleaned sample bases are explicit.
  • Colour, bleaching, splits and damage are separately understood.
  • Moisture and foreign-material methods are named.
  • Packing list and marks match the inspected lot.
  • Destination certificates and test reports are complete.
  • Any concession is approved in writing before shipment.

Takeaway

A defensible green pea specification defines the sample basis, bleaching and colour method, split and damage categories, moisture, foreign material and representative sampling. This makes offers comparable and gives inspectors an objective acceptance file.

Send your green pea requirement and quality specification to ZSCM Trading at sales@zscm.global.

References

More insights

SOURCING / SHARE YOUR REQUIREMENTS

Source your
next order.

Share the product, specification, quantity and destination so we can review your sourcing request.

Share product requirements
ZSCM
ZSCM TRADINGPRODUCTS / PROCUREMENT
Logistics division ↗Return to the opening ↗