Trading – Agriculture / INSIGHTS

Red Lentil Specifications: A Buyer Checklist for Whole and Split Products

Published · 4 min read

Red lentil specifications should describe the product a buyer expects to receive, not simply name a colour or an origin. Whole lentils with seed coats, whole dehulled lentils and split dehulled lentils serve different processing and retail requirements. A vague enquiry makes supplier offers difficult to compare.

Before requesting a price, define the intended use, processing form, measurable quality limits and evidence needed for acceptance. Carry the same requirements into the purchase documents.

Start red lentil specifications with the processing form

State whether the requirement is for whole lentils with seed coats, whole dehulled lentils or split dehulled lentils. Identify any polishing requirement and ask the supplier to describe the processing offered.

Confirm the proposed origin, crop year where relevant, grade or commercial description, quantity and shipment window. Do not treat an origin name as a complete quality specification.

For a mill buying whole lentils, processing yield and suitability for dehulling may be central questions. A packer buying split lentils may place greater emphasis on the proportion of fines, appearance and consistency in the finished pack. Record the buyer's application before choosing acceptance criteria.

Define quality parameters with a measurement basis

Use a specification sheet with four fields for each parameter: description, agreed limit, test or assessment method, and supporting evidence. Mark unresolved limits as requiring agreement rather than filling them with assumed industry values.

Physical condition and appearance

  • Moisture content, with the agreed test method and reporting basis.
  • Size distribution or sieve specification when size matters to the application.
  • Foreign material and stones, with clear definitions.
  • Damaged, discoloured or otherwise defective material, using agreed categories.
  • Whole, split and broken fractions appropriate to the product being purchased.
  • Fines or powder, assessed using an agreed method.
  • Colour and odour expectations, supported by a representative sample where useful.

For a split product, the word "broken" is particularly ambiguous. Define the fragment size or assessment method that separates acceptable split lentils from unwanted small pieces. Do not copy a whole-seed defect limit into a processed-product contract without checking its meaning.

The Canadian Grain Commission publishes detailed lentil grading definitions. These are useful when a contract references the Canadian grading system; they should not be assumed to define every processed red-lentil product or every origin.

Agree sampling and lot traceability

A sample needs a connection to the goods being offered. Ask whether it represents an identified stock lot, a production run or only a general product example.

Record the supplier, lot reference, sampling date, product description and sample identification. Agree who takes the shipment sample, where it is taken and how retained samples will be sealed and identified.

Before shipment, check that any certificate of analysis identifies the relevant lot and reports the required parameters with units. A generic supplier specification or an old laboratory report is not evidence of the current lot's measured results.

If an independent inspection is requested, define its scope. A quantity survey, visual inspection and laboratory analysis answer different questions; specify which are required and who receives the results.

Confirm packing and import documents early

Specify net weight per bag, bag construction, inner liner if required, closure method and palletisation. Agree the marking language, product description, lot coding and other label information before the bags are produced.

Ask the importer or appointed broker to confirm the destination requirements for the actual product form. Establish the document list, issuer, wording and submission timing before shipment. This may involve commercial documents, origin evidence, phytosanitary documentation or other certificates as applicable; the list is destination-specific.

Keep the description consistent across the contract, invoice, packing list and certificates. Distinguish net cargo weight from gross shipping weight, and reconcile bag count with the agreed net quantity.

What to include in the buying enquiry

  1. Processing form and intended application.
  2. Preferred origin and any acceptable alternatives.
  3. Quantity, shipment window and destination.
  4. Required quality limits and assessment methods.
  5. Packing, marking and sample requirements.
  6. Required shipment documents and inspection scope.
  7. Delivery term, named place and quotation currency.

Ask suppliers to identify deviations beside the relevant specification line. A general statement of compliance is less useful than a visible comparison of the offered product with the buying requirement.

Key takeaways

Define the processing form first, then measurable quality and sampling requirements. Compare supplier offers against one specification, and link the final quality evidence to the shipment lot.

Send your red lentil requirement, quantity, packing and destination to sales@zscm.global.

References

More insights

SOURCING / SHARE YOUR REQUIREMENTS

Source your
next order.

Share the product, specification, quantity and destination so we can review your sourcing request.

Share product requirements
ZSCM
ZSCM TRADINGPRODUCTS / PROCUREMENT
Logistics division ↗Return to the opening ↗